PRODUCTS
CONTACT US
Changzhou Kodi Machinery Co.,Ltd.
Marketing office: 7F, Tongjiang Road 398-1#, Xinbei District, Changzhou 213022 China
Factory address：Zhenglu Industrial Park, Changzhou, Jiangsu, China
Tel: +86 (519) 8696 5716
Fax: +86 (519) 8918 5716
Hotline: +86 15995073588
E-mail: info@kodichina.com
Web: www.kodichina.com
Home >> Technology
The Correct Way Of Using Electric High Speed Centrifuge Rotary Atomizer Of Spray Dryer
Time:2020-03-18 Reading times:760
In the last few months, many customers inquiry or buy the electric high speed centrifuge rotary atomizer for their spray dryer from KODI company, we know that centrifugal atomizer is core part of high-speed centrifugal spray drying, which including high-speed motor, spindle, nylon block, large coupling plate, bearings and spray disk, etc.
During the use of atomizer, if the cooling water system was not used correctly, the motor will be overheat, even burn out quickly after long time operation.
So the correct way to use electric high speed centrifuge rotary atomizer is that cooling water must be running before preheating of the drying tower and operation of the atomizer, and then keep the cooling water circulating while the spray dryer is working to avoid overheat. In this right way, you can lengthen the using time of electric high speed centrifuge rotary atomizer.
During the use of atomizer, if the cooling water system was not used correctly, the motor will be overheat, even burn out quickly after long time operation.
So the correct way to use electric high speed centrifuge rotary atomizer is that cooling water must be running before preheating of the drying tower and operation of the atomizer, and then keep the cooling water circulating while the spray dryer is working to avoid overheat. In this right way, you can lengthen the using time of electric high speed centrifuge rotary atomizer.
If you are satisfied with our products, welcome to our website: www.kodichina.com
You can also email: info@kodichina.com
